![]() This detector has a utility menu on the back of the unit. It is used for surveying naturally occurring radioactive material (NORM) contamination, gross wipe counting, contamination inspection of packages, equipment, and people, regulatory inspections, and for low energy radionuclide detection. A radiation symbol on the front label marks the center of the detector. ![]() The radiation detector has a 2”, halogen-quenched, uncompensated Geiger Mueller (GM) tube with a thin, mica end window for sensing ionizing radiation. The time period for the moving average decreases, as radiation levels increase. At low background levels, which are typical in a geographic area, the update is the moving average for the most recent 30-second time period. A red, flashing counter and a beep noise indicate each ionizing radiation change event. It has automatic operational ranges for a variety of radiation detection. These include low battery, alert, timer, total mode (to see the number of times a reading should be multiplied by to obtain the correct radiation count), calibration mode, utility menu (timer, calibration, alarm set mode), and units of measurement. The display shows various indicators, based on the mode setting, the function performed, and remaining battery power. The Inspector counts ionizing radiation changes, and the unit of measurement is selected and displayed using the mode switch. It is optimized to detect small changes (low levels) in radiation levels and to have high sensitivity to many common radionuclides. This radiation detector can detect low levels of the four main types of ionizing alpha and beta particles, and gamma rays and x-rays over automatic operational ranges. The Radiation Alert Inspector is a hand-held, microprocessor-based radiation detector that detects potentially harmful ionizing alpha and beta particles, and gamma and x-ray radiation, has a four-digit, LCD digital display of millirem (mR) per hour, and function indicators. ![]() Price:Įligible for FREE Super Saver Shipping on orders over $25. Operating Pressure: 60 ~ 100 psi (4 ~ 7 bars) Fastener Type: 23 Gauge headless pins. The compact, lightweight, slim profile is designed for maximum maneuverability and the rear exhaust with built-in silencer makes the Grex headless pinner truly the Best in Class. ![]() The powerful motor will drive fasteners with ease, even into the hardest of hardwoods. The Grex headless pinner utilizes an innovative and patented magazine that eliminates the need to adjust for different fastener lengths. Leaving only the tiniest of entry holes, the Grexs industrial strength 23 gauge headless pinner is ideally suited for finishing work and detailed woodworking and is perfect for light wood assembly, molding and decorative trim, dowel and joint pinning, mirror and picture frame assembly. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |